In the process of using bearings, many times present different levels of wear and tear, so we will tomorrow to introduce you to some of the ways to extend the life of bearings, so that you can better use bearings. I hope you can have some assistance.

The bearing device can be correct, affect the accuracy, life, function. Therefore, the design and assembly department should fully study the installation of bearings.

In the period of use, the fundamental internal conditions of bearings should be monitored frequently, such as temperature, vibration and sound measurement. These regular inspections will be early detection of potential problems and will avoid unexpected machine downtime scenes, so that the consumption plan can be completed, the progress of the plant productivity and efficiency.

 (1)Note that with the seal bearings can not be cleaned with this method, the seal of the external should adhere to the original can not be cleaned.

 (2) should be dismantled surface with clean gasoline, paraffin, toluene or xylene and other solutions clean, and clean rags dry, and then coated with a thin layer of lubricating oil, so that the installation can be operated to facilitate efficiency.

 (3)Pro installation turn over bearing package, it will be immersed in the above gasoline and other liquids to hand heavy slow rotation, to ensure that the insistence frame, rolling body and raceway surface of the package oil thoroughly cleaned.

 (4) cleaning a small number of bearings, first with the temperature of 90 ~ 100 ℃ hot oil drenching to make the encapsulated oil condensation, at the same time with a seamless mouth and do not fall chip tool digging clean all the old oil, and then drenching a few minutes, and then rinse with paraffin to remove the oil, and then clean again with gasoline. After cleaning, you should wear film gloves to put bearings on a clean cloth or paper on the task table to dry.